Aluminum In-Line Electric Water Pumps
Inline Booster Pump - Stewart's inline booster pump is intended for vehicles that experience overheating problems in low RPM situations. Since mechanical water pump speed is directly linked to engine speed, overheating becomes a major problem in situations such as parades, cruises, and stop-and-go traffic. The inline booster pump solves this problem by working in conjunction with the mechanical pump to create constant added flow to the engine block; the pump has been proven to increase flow by more than 300% at idle!
These pumps are currently being used by NHRA Pro Stock Champion Warren Johnson and Kurt Johnson by Dart Industries, and Jim Yates - as well as road racing American Lemans and SCCA World Challenge
Stewart Components has developed in-line electric water pumps with unique features and benefits. Weighing less than 5 pounds and measuring 6'' long with a 4-1/4'' diameter, these pumps have
single speed flow up to 55 GPM.
The electronic control box can be mounted remotely using the prefabricated harnesses sold separately. The pumps can be used alone in many applications or as a booster pump for vehicles that experience overheating problems in low RPM situations.
Because mechanical water pump speed is directly linked to engine RPM, overheating can become a major problem while in parades, cruises, or stop-and-go traffic. An in-line booster pump solves this problem by working with the mechanical pump to create constant added flow to the engine block. These pumps have been proven to increase flow by more than 300% at idle.
Lightweight Polymer with 1-1/4'' or 1-3/4'' slip-on inlet/outlet ports
I'd like to install this as an inline "booster", and just trigger this pump when I need additional flow (rather than run it nonstop). So if this pump isn't powered on, would it impede flow to/from my mechanical pump?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.