- Jegs
- Transmission & Drivetrain
- Torque Converters
- Street Torque Converters
- TCI Breakaway Torque Converters
TCI 11" Breakaway Torque Converter 1982-90 Chrysler Torqueflite 904LU
890-141350

Items You Need
Chrysler
Specifications:
TCI Breakaway Torque Converters are designed for use in moderately modified street machines, weekend racers, and as daily driving use. Breakaway Torque Converters provide between 2400 to 2600 RPM flash stall without negatively affecting part-throttle driving. TCI has engineered these Breakaway Torque Converters to be efficient at highway cruising speeds and to launch hard at wide-open throttle. Each unit is built to meet or exceed OE specification and triple tested during assembly. Once all the prep work on the component parts has been completed, the impeller is welded to the front cover. Immediately following this process, a pair of dial indicators are employed on a rotating table to verify that the impeller body and pump drive hub remain true. Each unit is then pressurized and subjected to a leak test to confirm the integrity of all the weld seams. Lastly, each unit is computer balanced to reduce annoying and potentially damaging drivetrain vibrations that would occur from an unbalanced torque converter. That's Triple Tested so you can be confident you're getting a torque converter that's ready to roll
.
Features
- Furnace-brazed fins
- Needle bearings
- Hardened, pre-ground pump hub
- Computer Balanced
- Installed Hardware Included
Benefits - Harder launches
- Quicker acceleration
- Improved low-end power
- Bolt-in (no modifications required)
- 1000+ RPM increase in stall over stock
Street/Strip Performance Torque Converter General Application Chart
Torque Converter Series advertised
camshaft durationrear gear ratio engine characteristics expected rpm stall speeds small block big block Street Rodder stock to 260° stock to 3.23 smooth idle, stock comp. ratio 1500 to 1700
1700 to 1900 Saturday Night Special stock to 265°
stock to 3.23
smooth idle, stock comp. ratio 1600 to 1800
1800 to 2000 Breakaway 265° to 280°
3.00 to 3.73
fair idle, mild modifications 2200 to 2400
2400 to 2600 StreetFighter 280° to 300°
3.55 to 4.56
rough idle, large fuel system, raised comp. ratio 3000 to 3400
3400 to 3600 Super StreetFighter 280° to 310°
3.73 to 4.88
rough idle, large fuel system, raised comp. ratio top end power 3500 to 3800
3800 to 4000 Ultimate StreetFighter 290°+ 3.73+ 1000+ horsepower with power adders 3500+ 3800+
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.