0
0
Top Categories
All Categories

Top Categories

All Categories


Shop By Vehicle
Account Login
1-800-345-4545
Gift Cards
Track Order
Help
Total Seal AL8

Total Seal Assembly Lube 8oz. Bottle

901-AL8

Ships
Save $20 Off $250, $50 Off $500, $100 Off $1,000, $150 Off $2,000. Promo Code: SAVEMORE exclusions apply

$17.11
Total Seal Assembly Lube 8oz. Bottle $17.11
Out of stock
5 left in stock
QTY
Assembly Lube
  • 8oz. Bottle
  • Items You May Also Consider

    Total Seal AL8 Details

    Assembly Lube

  • Provides a tenacious yet fluid film to protect reciprocating and rotating components during assembly and initial break in
  • Non-foaming product mixes with break-in oil and extends film thickness during the critical break-in process
  • Can be added to regular oil to increase film thickness
  • Does not harden or cause parts to become sticky

  • Specifications:

    Manufacturer's Part Number:
    AL8

    Essential for Engine Break-In!

    The unique lubricants in this break-in oil provides the highest levels of zinc and phosphorus for optimum ring seating during the critical first few hours of your freshly assembled engine. This oil promotes superior ring seating and protects those tight tolerances during initial start, making sure you break-in your engine right!
    Note: This oil is intended ONLY for complete rebuild engines during initial start-up. Some crate engines have been tested and broke-in by the manufacturer or engine builder.

    Features:
  • Petroleum oil provides the highest levels of zinc and phosphorus
  • Additive package promotes superior ring seating while providing maximum protection during initial break-in
  • Requires no additional additives
  • Compatible with methanol and high-octane race fuels
  • Specifically designed for optimum ring seating
  • Formulated for Total Seal by DRIVEN Racing Oil, born from Joe Gibbs Racing



    BR Break-In Oil
  • Viscosity typical of SAE 15W-50
  • Specifically designed for breaking in engines and promoting superior ring seating
  • Fully formulated and require no EOS or other additives
  • Can be used for up to 2 hours of break-in/dyno time before changing to race oil



    BR10 Break-In Oil
  • Exclusively Formulated for TOTAL SEAL
  • Viscosity typical of SAE 0W-10
  • For ring break-in on competition engines only
  • Should be used in engines that race on 0W-0 to 0W-20 grade oils
  • Promotes superior ring seating for maximum compression and horsepower
  • Leaves a thin protective film that allows the rings to seat in quickly
  • Fully formulated and require no EOS or other additives
  • Can be used for up to 2 hours of break-in/dyno time before changing to race oil



    BR30 Break-In Oil
  • Viscosity typical of SAE 5W-30
  • Same formula as original BR and BR10 in a SAE 5W-30 viscosity
  • Good for tight clearance and/or low temperature break-in
  • Specifically designed for breaking in engines and promoting superior ring seating
  • Good for restrictor plate engines, drag race engines, and OEM rebuilds



    Assembly Lube
  • Provides a tenacious yet fluid film to protect reciprocating and rotating components during assembly and initial break in
  • Non-foaming product mixes with break-in oil and extends film thickness during the critical break-in process
  • Can be added to regular oil to increase film thickness
  • Does not harden or cause parts to become sticky

  • Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.