Automatic Transmission Applications
|Inlet Location & Size:||Passenger Side / 1-1/2''|
|Outlet Location & Size:||Passenger Side / 1-3/4''|
|Radiator Core Height:||18''|
|Radiator Core Width:||25''|
|Radiator Core Thickness:||2''|
Upgrade to a Factory-Fit All Aluminum Radiator
O.E.M. radiators are just that, Original Equipment. They are designed to cool stock applications and overheating can take the fun out of cruising your hot rod or muscle car quickly. Be Cool designs their radiators in the same ''Crossflow'' / ''Downflow'' configuration as the original radiator to avoid any installation issues but that is where the similarities stop! Crossflow radiators are constructed with their tanks on the sides, while a Downflow radiator has its tanks on the top and bottom of the core. A commonly asked question is: Which is better, a Crossflow or Downflow radiator? The answer: Both will cool the same as long as the core surface of the radiator is the same in square inches.
Cooling monster motors, especially when faced with common problems like tight spaces and small grille openings can be a challenge. Be Cool's cooling technology produces radiators that are 40% lighter than conventional O.E.M. units, yet have greater cooling power. These aluminum radiators feature a dual 1'' tube core, .080'' thick aluminum tanks. They are manufactured with OEM-sized inlets and outlets in the correct OEM locations. Additionally, they come with a billet filler neck and a brass petcock. Each radiator is 100% pressure tested before being shipped in expanding foam packaging. Their epoxy-free construction provides better heat dissipation, too, while allowing complete repairability. They are available in a natural aluminum or a mirror-polished finish that is real show stopper!
All Be Cool radiators are compatible with all coolants and 100% Made In The USA! They are Guaranteed to lower your coolant temperature a minimum of 20-degrees, or your money back! In fact most customers report even greater coolant temperature drops. If you have a stock vehicle think O.E.M., but if you have a performance vehicle you should consider Be Cool! Made In The USA.
- All Aluminum Construction
- Dual 1'' Tube Core
- Single Pass Design
- Billet Filler Neck with High Capacity Over Flow Tube
- Form-Folded Straight Tanks
- OE Inlet/Outlet Sizes and Location
- Custom Fit for Direct Replacement Mounting
- Automatic Transmission Radiators feature a Built-In Heavy Duty Cooler
- 100% Pressure Tested
- Durable Packaging
- Made In The USA
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.