Ratings |
---|
Price |
Brand |
Big Block Ford
The Edelbrock Pro-Flo 4 EFI Kit #35680 for Ford big-block 429-460 engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold preassembled with high-flow injectors, fuel rails, and 4150-flange throttle body. All supporting sensors, wire harnesses, and ECU are included along with a full-color installation manual. The Torker II EFI manifold is designed with a larger cross-sectional area in the plenum with longer runners for high horsepower and/or large cubic-inch applications. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS-based smartphones or tablets.
Edelbrock 35680 PRO-FLO 4 EFI Fuel Injection Kit Features:
- System Type: Traditional 4150-Style Kit
- Gasket Or Seal Included
- Wiring harness included
- Idle air control motor
- Fuel Pressure Port: 1/8-27 NPT
- Bore Diameter: 1.750 in.
- Throttle body type: 4 Barrel
Specifications:
Is this system entirely completely all inclusive? Do I need to add anything else to make this work optimally? A better distributor, pulugs, forced induction...anything at all? I'm trying to optimize power and fuel use. Those are the priorities.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.