0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
Edelbrock 3701PK
Easy Kit

Edelbrock Performer Power Package for Small Block Chevy EGR

350-3701PK

Free Shipping Ships

$876.90
Edelbrock Performer Power Package for Small Block Chevy EGR $876.90
QTY
  • Intake Manifold, Carburetor and Camshaft Kit
  • Small Block Chevy 262-350ci 1955-1986
  • 4-bbl Spread-Bore Carb Flange (EGR)
  • Idle-5500 RPM Range
  • Edelbrock 3701PK Details

    Chevy Small Block Performer Power Packages

  • Designed for street 1955-86 262-400ci Chevrolet small-block V8s.
  • Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I.
  • Has provisions to add oil fill tube.
  • Not for 1987 and later cast iron or Chevy Bowtie heads.
  • Will fit 1987 and later stock aluminum heads.
  • This intake is for 305, 350 and 400 V8s with OEM 4-bbl. or Edelbrock p/n 350-1400 carb. 1972-86 and GM corporate engines with 350 V8s; 1981-86. (Intake p/n 350-2101 is for 302, 327 and 350ci V8s with OEM or Edelbrock (350-1400) 4-bbl. carb.; 1966-72 (1973 non-California) passenger cars, 1966-83 trucks and Suburbans; except stock equipped EGR.)

    Power Package includes matching:
  • Performer Intake Manifold 350-3701
  • Edelbrock Performer 600cfm Carburetor 350-1400
  • EGR Carburetor Adapter 350-1476
  • Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters 350-2102

    Installation Notes:
  • Port exit dimensions: 1.14'' x 1.88''
  • Recommended intake gasket: Edelbrock 350-7201
  • Manifold height: (A) 3.50'' , (B) 4.60''; Carb pad height = 4.05''
  • View Manifold ''A/B'' Measurement Guide.
  • Recommended intake gasket is Fel-Pro 375-1256.
  • Use EGR adapter 350-8035 to adapt clamp-on EGR valve
  • Choke plate 350-8901 is included
  • EGR spacer 350-1476 is required with 350-1400 carburetor also required on centerbolt heads with 1986 & earlier bolt pattern

    Camshaft Spec:
  • Designed for optimum torque from the low-end to the mid-range.
  • They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s.
  • You can expect a major improvement in throttle response and torque.

    Duration Advertised:280° Intake / 295° Exhaust
    Duration @ .050'' Lift:204° Intake / 214° Exhaust
    Valve Lift:.420'' Intake / .442'' Exhaust
    Lobe Separation Angle:112°
    Open/Close @.050'' Cam Lift:Intake - 5° ATDC (opens) / 29° ABDC (closes)
    Exhaust - 44° BBDC (opens) / 10° BTDC (closes)

  • Proven Performance With No Guesswork!

    The Edelbrock Performer Power Packages are designed for stock engines and significantly increase performance, fuel economy while lowering exhaust emissions. These packages provide incredible power from idle to 5500 RPM for your daily commute, towing, passing or uphill climbs in your car, truck, van or recreational vehicle. The main components of these packages include intake manifolds, carburetors and camshafts. Edelbrock also offers cylinder heads that match to optimize performance.

    For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with emissions equipment compatibility. Performer Multi-Point EFI Systems, camshafts and cylinder heads are also available to increase performance even further on GM vehicles originally equipped with throttle body injected V8's.

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.