Items You Need
525 lph Pumps
Features:
- Converts factory fuel tank or fuel cell to an in-tank EFI fuel system quickly and easily
- Supports up to 1,200 HP on EFI applications or 1,450 HP on carburetor applications (60 PSI at 13.5 V / 16.9 AMP draw)
- 525 lph pump
- 1/4 in. (.250) NPT ports
- Returnless-style fuel system
- Use with gasoline or E85
- Installs in any fuel tank from 7.500 in. to 12 in. depth
- Low-profile design is only 1.275 in. thick above the tank surface for added clearance
- An innovative clamping system allows locating the module anywhere in the tank beside an existing sending unit
- 3 in. x 15 in. Holley Hydramat ensures consistent fuel supply with a mounting flange containing (6) clocking pin locations that allow for 360-degree adjustment to clear sending unit levels, any tank floor restrictions, plumbing and wiring locations
- Black anodized aluminum construction
- Note:
- Maximum size of 6 AN lines and fittings due to space limitations between unit and fuel tank
- Recommended to use 30 amp fuel pump relay along with 12 gauge minimum wire size
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.