JEGS
Electric Exhaust Cutout Kit for Dual Exhaust 3 in.
555-30883
Click image to zoom
| Ratings |
|---|
| Price |
| Brand |
3"
Specifications:
Part Type
Hardware Included
Yes
Quantity
Sold as a kit
Exhaust Cutout Finish
Natural
Exhaust Cutout Installation
Bolt-on
Exhaust Cutout Material
Aluminum
Exhaust Cutout Style
Electric
Tubing Diameter
3 in (76.2 mm)
Shipping Weight:
4.12
Package Height:
4.5
Package Depth:
11.3
Package Width:
6.4
Part Category:
Performance Parts
Part Fitment:
Universal
30883 - JEGS Electric Exhaust Cutouts is rated
out of
5 by
13.
Rated 5 out of
5
by
Dano84GMC from
Just hooked them up to my Pypes crossover exhaust and couldn't be happier. Easy install and switch works perfect.
Date published: 2017-06-11
Rated 4 out of
5
by
Rjsalazar from
Electric Cutouts
The cutouts alone work amazing, was suprised with the way they functioned, especially for the price. They were extremely easy to wire and install. The ONLY problem I ran into was that both cutouts were designed to fit the same way as each other. My left side cutouts motor is facing toward the outside while my passengers side cutout is facing toward the transmission (It would hit my floor board if I faced it outside) To solve my problem I had to flip one cutout and install it the wrong way. But as in the overall performance of the cutouts, I love them. Had them for about a month and they are holding up fairly well with no leaks
Date published: 2022-03-11
Rated 4 out of
5
by
Ian L from
good
So far I am happy. I bought these mostly to make myself smile and laugh at regular folks reactions. They fit just fine after I manipulated the rest of my exhaust so that the motors had adequate clearance.
Date published: 2022-02-17
Rated 4 out of
5
by
The450r from
Works great but had install issues
I bought these and have them working now and love them. Nice actuators and harness with nice switch with plenty of wiring. The biggest issue was the low quality terminals and plastic connector housings. Based off a GM weather pack connector the male terminals spread and bent after one successful connection for bench testing. then wouldn't plug in afterward. To fix this problem I put painless wiring male terminals and female terminals in the connectors but soon found that the plastic connector cavities didn't hold the terminals straight so they wouldn't engage as they were plugged in. I had a 2 cavity connector and installed it on male and female sides and now that side plugs in easily and correctly. I would recommend buying a painless wiring 2 cavity connector kit. And doing these repairs before installation.
I had everything mounted and wired and they wouldn't plug in. I didn't have my terminal removal, crimp tools and the extra painless wiring terminals at home. And fought these terminals on the ground and finally back in the lift. To get it resolved and installed.
Date published: 2016-04-10
Rated 4 out of
5
by
Juan R from
Quality product
Easy to install when you already have the muffler cutouts. However, for a dual exhaust system, there ara no left & right electric cutouts. The cutout motor location is towards one side of the mufflers, so they do not look symmetrical and one of the cleanup orifice had to be plugged to avoid an exhaust leak when closed. The manufacturer needs to provide a left and right motor for double motor setup!
Date published: 2016-02-27
Rated 3 out of
5
by
859camaro from
for the price I expected them to seal nicely
bought these knowing you get what you pay for, came in and the quality seemed pretty great! solid product. get them installed and wiring ran nicely and they work smoothly only issue I have is in the closed position I can still hear the exhaust leak unless I hold the switch down and motor holds flaps down tight. Gets really annoying and have seen ebay cutouts seal up better. but the quality is great so far from these(been on for about 1000 miles now)
Date published: 2018-09-11
Rated 1 out of
5
by
05 Silverado from
for the price I also expected them to seal nicely
I copied this from another review because the exact same thing is going on with my Z71.
bought these knowing you get what you pay for, came in and the quality seemed pretty great! solid product. get them installed and wiring ran nicely and they work smoothly only issue I have is in the closed position I can still hear the exhaust leak unless I hold the switch down and motor holds flaps down tight. Gets really annoying and have seen ebay cutouts seal up better.
Date published: 2022-06-08
I had one of the motors break off and become unusable, is there anyway to just order the electric motors and gears?
The motor and gears are not available separately, you would need to order 555-30882 as a replacement. These have a one year warranty, so if it hasn't been that long definitely call customer service to see about replacing the part under warranty.
Date published: 2018-03-31
I have a 1999 Ford F-150 with dual strait pipe. Can I put these on it?
Yes you can put these on anything That has a 3" pipe. All you would have to get is two exhaust pipe cutouts.
http://www.jegs.com/i/JEGS-Performance-Products/555/30752/10002/-1
Date published: 2018-02-01
Can these be used cracked open and stopped with the switch? Or are they fully open & close only. Looking for "Adjustable Volume Control" affect.
These can be used in any orientation, the switch will move the blade and stay when you release it.
Date published: 2017-12-12
Is there any warranty on the motors?
These are warranted for 1 year from date of purchase.
Date published: 2017-12-01
Do you have any idea of how many cycles these will last?
As long a they are maintained well they will last for quite a while.
Date published: 2017-11-30
Continued Converter lock up during engine braking Greatly reduced converter slippage in 3rd and 4th gearReduces transmission temperaturesEasy installation with Step-by-Step instructions. Autoloc Exhaust Brake Lock-Up Controls.
Features: RPM & Throttle Position Sensor inputs to the Attitude controller for vehicles not equipped with an OBDII connection Vacuum Tee and 8ft 1/8” for MAP load input (2) 5 volt reference outputs for creating custom controls (2) Ground source ...
Some parts are not legal for use in California or other states with similar laws / regulations
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.