's Account
Gift Cards
Track Order
Help Center

Pro Systems Electric Fuel Pump 440 GPH


Product Q&A
View Now
Click image to zoom
Electric Fuel Pump 440 GPH
5 left in stock
Electric Fuel Pump
  • 440 GPH
  • -10AN Inlet/-8AN Outlet
  • Requires By-Pass Style Pressure Regulators
  • Each
  • Free Shipping - Ships

    Items You May Also Consider

    8804 - Pro Systems 440 GPH Electric Fuel Pump is rated 3.0 out of 5 by 7.
    Rated 5 out of 5 by from My second one, My second one, use on 1000 hp BBC pulling truck. Mount upright, below & near tank.
    Date published: 2023-07-22
    Rated 5 out of 5 by from Great pump but... Installed the pump this morning. Runs great , sounds great. Running -8AN with a return regulator. The flow is so high I couldnt get it under 6 PSI but thats OK. One thing though. The descriotion says -10AN inlet and -8AN outlet. That is not the case. . Its 8 in and 10 out.
    Date published: 2018-09-10
    Rated 4 out of 5 by from Ordered about a week ago shipping was right on time as always but..... Open the box and the pump looks great. Quality machining-anodizing is great-not a scratch on it. I’m very picky. A little upset that it came with a USED fitting in the box. Description is very vague. Inlet and outlet on the pump body are -12AN. So I ended up ordering the wrong fitting. Oh well
    Date published: 2017-12-24
    Rated 4 out of 5 by from Nice place Works great it very quiet it looks good and good price
    Date published: 2017-07-17
    Rated 1 out of 5 by from I wanted to like the pump... After about 100 miles of use, the pump started to fail. I had to beat on the pump's motor several times to make it home. Thank god I was not on the line spraying N2o when it decided to take a dump.
    Date published: 2021-01-20
    Rated 1 out of 5 by from Junk Pump Took pump rite out of the box,installed it just like the very little instructions they give you stated ,would not prime up,finally got it to prime ,got a quarter mile down the road lost prime again,Junk .
    Date published: 2018-10-01
    Rated 1 out of 5 by from Looked great out of box it was Hugh I bought it in the fall finally installed it for race season it lasted one weekend and took a dump left me on the starting line it's was brand new??????? .
    Date published: 2018-05-14
    • y_2023, m_9, d_30, h_4
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_7
    • loc_en_US, sid_10001_10001_3516446, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    On the pump itself, what fittings screw into it? NPT? If so What size? What I bought before is not working. It would be nice if the listing would just tell you.

    Asked by: Do Better with Details
    The Pro Systems 232-8804 pump uses ORB fittings.
    Answered by: jshook
    Date published: 2023-09-27

    How much horsepower will this fuel pump support when using E85?

    Asked by: Chazzy
    This will easily support 500hp on E85, it depends on your application it can support more.
    Answered by: Rusty B
    Date published: 2018-03-09

    Can I use this pump on a street car with a bypass system

    Asked by: Walk dogs
    It can be used on the street using a bypass regulator.
    Answered by: Rusty B
    Date published: 2018-02-26

    how many gph does this pump flow at 7 psi?

    Asked by: caseyw
    This pump is listed to floe 440 Gallons Per Hour (GPH) at 7 psi
    Answered by: Rusty B
    Date published: 2018-02-26

    how many amps does the pump draw ?

    Asked by: jess c
    Because its a return style regulator the pump isn't under a hard load all the time like a dead head system. So when cycling fuel from the front to the rear of the vehicle at 7 psi it only draws about 7 amps. BUT when under a load of G forces the pressure will rise in the line going forward to offset the weight of the fuel in the line to maintain the 7psi up front. So many times this line pressure will need to rise to lets say 18 psi to maintain 7 psi up front. Then you will draw about 10 amps.
    Answered by: Rusty B
    Date published: 2018-02-26

    Is there rebuild kits availible for this pump or does the manufacture take them back for overhaul at a price ? 

    Asked by: reeltime
    Pro Systems will rebuild your pump for a fee if it is necessary.
    Answered by: Rusty B
    Date published: 2023-03-09

    What kind of warrentee is on this pump ? 

    Asked by: reeltime
    This is the warranty statement from Pro Systems - All items we manufacture, sell and calibrate for customer use is tested to be free from defects and workmanship prior to shipping from our facility and prior to customer installation. Warranty is limited, at our option, to the replacement, repair, or credit of the defective merchandise.
    Answered by: Rusty B
    Date published: 2018-03-26

    Is this pump American made or Chinese

    Asked by: G money
    • y_2023, m_9, d_30, h_4CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_8
    • loc_en_US, sid_10001_10001_3516446, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.