And Expert Tech Advice!
Category
Top Categories
All Categories
AFR - Airflow Research 227cc Eliminator Race Aluminum Cylinder Heads SB-Chevy
033-1067
AFR - Airflow Research 1067 Details
Race Ready CNC Porting Eliminator Heads
Small Block Chevy 227cc Eliminator Race Basic Package Components
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-Angle Valve Job
Intake Valve, 2.100'' x 5.006'' o.a.l.
Exhaust Valve, 1.600'' x 5.024'' o.a.l.
1.550'' OD Solid Roller Dual Valve Spring, 225 lbs. on seat, .710'' maximum lift, max RPM 7200-7400
10º Manley 4140 Chrome Moly Retainers
10º Valve Locks
7/16'' Rocker Studs
Adjustable 5/16'' Guide Plates
Viton Valve Seals
Hardened Spring Cups
Intake Valve Seats
Exhaust Valve Seats
Bronze Valve Guides
Small Block Chevy 227cc Eliminator Race Head Specifications
Head Torque w/Moly Lube
65-70 Ft. Lbs.
Rocker Stud Torque
55 Ft. Lbs.
Intake Port Gasket, 1.310'' x 2.180'' w/ 3/8'' radius
Fel-Pro 375-1206 - DO NOT PORT MATCH Intake Manifold to Fel-Pro Gasket.
Exhaust Port Gasket
Fel Pro 375-1405
Head Gasket
350ci Fel Pro 375-1003
400ci Fel Pro 375-1014
Head Bolts & Studs
Standard ARP
Head Bolt Washers
Manley Standard
Stud Girdle
AFR Offset 033-6208
Suggested Manifold
AFR p/n 033-4801, AFR p/n 033-4802 or Edelbrock Vic Jr p/n 350-2975 or Super Victor p/n 350-2925
Spark Plug Starting Range
Autolite 3910
Combustion Chambers
75cc
Intake Port
227cc
Exhaust Port
80cc
Spring Pocket can be cut to 1.680, no deeper.
Valve Spacing
60/40
Rocker Arms
.450'' Offset / Shaft Mount
Valve Angle
23°
Angle Mill
.008'' per cc
Flat Mill
.006'' per cc
NOTE:
Flat and Angle mills might require a .120'' thick head gasket.
Specifications:
Timeless Design - The First in AFR's Line High flowing AFR 227cc intake port small block Chevy angle plug aluminum cylinder heads are available in two stages of performance. The Race Ready version features 100% CNC ported intakes while the higher flowing Competition version features 100% CNC ported intakes with greater detail. Both come with 100% CNC ported 65cc or 75cc combustion chambers and 80cc exhaust ports with a 3/4'' thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm diameter stem, 2.100'' intake and 1.600'' exhaust with AFR's hardened ductile iron interlocking valve seats. The 227 has 60/40 valve spacing and piston valve pockets should be checked. The exceptional flow characteristics and 23° valve angle make this the perfect head for 350-434ci engines in drag cars, sprint cars, and late model oval trackers operating from 4500 rpm and up. If you choose to run stud girdles AFR offset girdles are required. These heads requires shaft mount rockers or .050'' offset rocker arms for durability and reliability of valve train components. With the .050'' offset the intake rocker arm will be at a slight angle and the roller tip will not be perfectly parallel or centered on the valve tip. Not recommended for street use, unless shaft mount rocker is used. The exhaust port and bolt pattern are raised .250'' over GM L-98 cylinder head, this rarely affects header or chassis fitment. These 227cc aluminum cyilnder heads are available in either standard port or spread port exhaust configurations. Spread port heads have the center exhaust ports spread apart 5/8'' over stock L98 GM heads. The reason for spread port heads is to achieve additional cooling in the center of the head where the heat concentration is greatest. As standard headers do not fit, spread port headers are required since the center ports are spread further apart then stock GM products. The increased spacing on the exhaust port also requires the use of exhaust gasket Fel-Pro p/n 375-1409. Spread port heads only come with a Stahl bolt pattern. AFR's spread port head has all the benefits
and features of AFR's standard head. .
with 60/40 Valve Spacing
){kind=link}