High-Output Fuel Pumps
Ideal for carbureted power plants not using a separate fuel pressure regulator, the high output (H/O) Fuel Pump is designed for engines making 200-600 HP and is ideal for street cars and mild race cars alike. Similar to our SS Fuel Pump design, but internally regulated to 7 PSI. Available with optional 3/8' NPT (or) ORB -8 inlet and outlet ports. Durable billet construction. Fuel flow exceeds 90 GPH at 5 PSI and draws less than 5 amps. Internally regulated to 7 PSI, eliminating the need for a separate regulator on most carburetors. Rated for continuous duty, the pumping mechanism features a composite rotor, stainless steel vanes and heat treated steel top and bottom plates for durability.
High-Volume Fuel Delivery with Optimal Line Pressure
Aeromotive Street/Strip Fuel Pumps are for 200-750 HP carbureted engines with a standard regulator. Internally regulated at 7 psi, Aeromotive High-Output Fuel Pumps are for 200-600 HP carbureted engines without a separate regulator. The Street/Strip and High-Output fuel pumps are E85 compatible and have composite rotors, stainless steel vanes, heat-treated steel plates, and 3/8 in. NPT or -8AN ports. Marine and polished Platinum Pumps are also available.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.