0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
Brodix 2021026

Brodix BB-2 XTRA Series Cylinder Head 365cc Intake Ports

158-2021026

made in usa
Free Shipping Ships

$1,219.71
Brodix BB-2 XTRA Series Cylinder Head 365cc Intake Ports $1,219.71
QTY
BB-2 XTRA Series Cylinder Head
  • 365cc Intake Ports
  • 119cc Combustion Chambers
  • 2.300'' Intake / 1.880'' Exhaust Valves
  • 1.625'' Dia. Springs - 255# Seat Pressure
  • Titanium Retainers
  • Assembled, 1/pkg.
  • Brodix 2021026 Details

    BB-2 XTRA Series Cylinder Heads

  • 365cc Intake Port Volume
  • 1.625'' Diameter Valve Springs - 745# Open, 255# Closed Spring Pressure
  • Cylinder Head Specifications
  • Intake Port Volume: 365cc - Rectangle Port
  • Combustion Chamber Volume: 119cc
  • Valves: 2.300'' dia. x 5.468'' o.a.l. Intake / 1.880'' dia. x 5.394'' o.a.l. Exhaust ( 11/32'' Stem Diameter )
  • Valve Springs: 1.625'' Diameter - Open Pressure: 745 lbs.; Closed Pressure: 255 lbs.; Installed Height: 2.050''; Max Lift: .800''
  • Spring Retainers: 1.625'' 10° Titanium
  • Rocker Studs: 7/16''
  • Guide Plates: 3/8''
  • Valve Seals: 11/32''
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Brodix p/n 158-MG2001, Fel-Pro p/n 375-1252-3, Cometic p/n 245-C5428
  • Head Gasket: 4.310'' Bore - Fel-Pro p/n 375-1027, Cometic p/n 245-C5432; 4.540'' Bore - Fel-Pro p/n 375-1017, Cometic p/n 245-C5433; 4.600'' Bore - Fel-Pro p/n 375-1057, Cometic p/n 245-C5434
  • Exhaust Gasket: Fel-Pro p/n 375-1411 or Cometic p/n 245-C5429
  • Head Bolts: ARP p/n 070-135-3606, Manley p/n 660-42192
  • Head Studs: ARP p/n 070-235-4702 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 26° and 4° Intake, 17° and 4° Exhaust
  • Angle Milling: .0066'' per cc
  • Flat Milling: .0050'' per cc
  • Pushrod Slots: Standard
  • Pushrods: Check pushrod clearance with head installed on the engine block before final assembly
  • Stud Girdle: Standard, Brodix p/n 158-1230
  • Rocker Arms: Standard
  • Lifters: Standard
  • Pistons: Standard w/BB-2 X, BB-2 XTRA, BP BB-2 XTRA; Check Piston Valve Notches w/BB-3
  • Exhaust Pattern: Raised .600''
  • Valve Centerline: Standard w/BB-2 X, BB-2 XTRA, BP BB-2 XTRA; Exhaust Valve Moved .300'' w/BB-3
  • Spring Pockets: May not be cut any larger or deeper than 1.625''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix HV 2000 (p/n 158-HV2000) / HV 2001 (p/n 158-HV2001)

  • Specifications:

    Accessory Bolt Holes Drilled
    Yes
    CNC-Machined Combustion Chamber
    No
    CNC-Machined Exhaust Runner
    No
    CNC-Machined Intake Runner
    No
    Combustion Chamber Volume (cc)
    119
    Cylinder Head Finish
    Natural
    Cylinder Head Material
    Aluminum
    Cylinder Head Style
    Assembled
    Damper Spring Included
    Yes
    Exhaust Port Location
    Raised
    Exhaust Port Shape
    Round
    Exhaust Valve Angle
    26
    Exhaust Valve Diameter (in.)
    1.88
    Exhaust Valves Included
    Yes
    Guideplates Included
    Yes
    Heat Crossover
    No
    Intake Port Location
    Standard
    Intake Port Shape
    Rectangular
    Intake Runner Volume (cc)
    365
    Intake Valve Angle
    26
    Intake Valve Diameter (in.)
    2.3
    Intake Valves Included
    Yes
    Lock Style
    10 degree
    Locks Included
    Yes
    Machined for O-Ring
    No
    Maximum Valve Lift (in.)
    0.8
    Number of Springs Per Valve
    Dual
    Oiling Style
    Through pushrod
    Outside Diameter of Outer Spring (in.)
    1.64
    Quantity
    Sold individually
    Retainer Material
    Titanium
    Retainers Included
    Yes
    Rocker Arm Nut Thread Size (in.)
    7/16"-20
    Rocker Arm Nuts Included
    No
    Rocker Arm Studs Included
    Yes
    Rocker Arms Included
    No
    Steam Holes Drilled
    No
    Valve Cover Mounting Style
    Perimeter bolt
    Valve Guide Material
    Phosphorous bronze
    Valve Guides Included
    Yes
    Valve Seat Machine Style
    5-angle
    Valve Seat Material
    Ductile iron
    Valve Seats Machined
    Yes
    Valve Springs Included
    Yes
    Valve Stem Seals Included
    Yes
    Manufacturer's Part Number:
    2021026

    Proven Competition Head That Works with
    Most Standard Big-Block Chevy Components!

    26°/4° Intake & 17°/4° Exhaust Valve Angles

    The BB-2 X head works well with a light car or large engine (509-555ci). It has a 340cc intake port and flows over 360 cfm with only the bowls blended and the intake ports matched to the gasket. Available with a 110cc, 115cc or 119cc combustion chamber, but may be angle machined to 98cc. The BB-2 X features a CNC'd intake port match and bowls are blended while the intake ports, exhaust ports and combustion chambers remain as casted.
    The BB-2 XTRA head works well on a 540ci or larger engine. It has a 365cc intake port and flows over 375 cfm with only the bowls blended and the intake ports matched to the gasket. The BB-3 works well on a 540-605ci engine. It has an exhaust valve centerline that is moved by .300'' with a 370cc intake port and flows over 370 cfm, but may not be angle machined. While creating the 100% CNC Ported BP series BB-2 XTRA, the professionals at Brodix invested many long hours on the flow bench and at the track developing a completely ported cylinder head. Brodix incorporated this porting design into a ported masterpiece that can be mass produced. The BP BB-2 XTRA heads are CNC-ported to a mirror finish and flow within 1% of each other. The bottom line is that Brodix builds you the most accurate, best flowing out-of-the-box cylinder heads available at the best price. These cylinder heads accept all standard pistons, intake manifolds, and rocker arms. The exhaust ports are raised .600'' higher than stock. Valve cover rails are now raised to assure no oil leakage. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold Individually, 1/pkg. !

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Flat Tappet & Hydraulic Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  •   1.625'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 745 lbs.
  • Spring Pressure Closed: 255 lbs.
  • Installed Height: 2.050''
  • Max Lift: .800''
  •   1.645'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 945 lbs.
  • Spring Pressure Closed: 330 lbs.
  • Installed Height: 2.100''
  • Max Lift: .875''
  • 2021026 - Brodix Big Block Chevy BB-2 X, BB-2 XTRA & BB-3 Series Aluminum Cylinder Heads is rated 4.0 out of 5 by 1.
    Rated 4 out of 5 by from hopefull happy with heads only wish you would drill for the inside head bolts! would save a lot of time not having to machine finished heads!
    Date published: 2018-05-07
    • y_2018, m_10, d_23, h_8
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_72396, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Will these heads work with dome top pistons

    Asked by: Montie
    These heads will work with a flat top or small dome, but it needs to be sized for use with this head and you will need to check piston to valve clearance as your head gasket and cam may affect the clearance.
    Answered by: Rusty B
    Date published: 2018-05-15
    • y_2018, m_10, d_23, h_8CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_en_US, sid_10001_10001_72396, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.