The Edelbrock E-Force 122 Supercharger Kit uses a positive displacement supercharger that is capable of producing over 500 horsepower. This kit includes the Eaton H122 rotor assembly supercharger, manifold, drive pulleys, belt, and all necessary items to install on small-block Chevys with standard heads or with Edelbrock E-Tec (Vortec Style) cylinder heads. Preliminary testing netted a peak of 507 horsepower and 487 ft/lbs of torque @ 5 psi on a 350 c.i.d. with 9.5:1 compression. The compact compact design may potentially fit under the hood of most muscle car and street rod applications. The E-Force 122 is designed for use with factory style belt and pulley configurations. Will not work with aftermarket serpentine pulley systems and will require the use of a long-style water pump.
Edelbrock E-Force Supercharger Kit Features:
- Includes an Internal Bypass Valve that virtually eliminates parasitic loss under part throttle and deceleration, requiring less than 1/3 horsepower at 60 mph cruise
- Easy-to-follow installation manual with no fabrication or special tools required
- Self contained oil system with 100,000 mile service interval (no drilling or plumbing required)
Will this work on a 2011 Denali 6.2l
Will the supercharger and a carb fit under the hood of a 1980 Corvette?
How much boost is this capable of producing? Are there different pulley's available to adjust that?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.