1986-Earlier Small Block Chevy
|Combustion Chamber Volume:||64cc or 70cc|
|Intake Runner Volume:||185cc|
|Exhaust Runner Volume:||65cc|
|Intake Valve Diameter:||2.02''|
|Exhaust Valve Diameter:||1.60''|
|Valve Stem Diameter:||11/32''|
|Valve Guides:||Manganese Bronze|
|Valve Spring Diameter:||1.46''|
|Valve Spring Maximum Lift:||0.575''|
|Exhaust Port Location:||Stock|
|Spark Plug Fitment:||14mm x 3/4'' Reach, |
|Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28'' H2O|
Installation Notes: When using stock rockers on S/B Chevy Performer & Performer RPM heads, .100'' longer than stock pushrods are required. Due to valve-to-cylinder bore interference, SB-Chevy heads may not be used on engines with less than 4'' bore (262, 265, 283, 305, 307 c.i.d.) except with camshafts having less than .450'' valve lift. Requires hardened pushrods.
Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
Heat crossover is machined for 50-state emissions legal performance.
Edelbrock Performer Aluminum Cylinder Heads are designed, cast and manufactured in the USA for unsurpassed quality. The top quality features incorporated into these heads include: highly effecient port design, state-of-the-art combustion chamber shapes, manganese-bronze valve guides, and threaded inserts in the exhaust bolt holes and rocker stud holes for strength and durability. They provide great torque and horsepower up to 5500 rpm and are 50 state emissions legal to fit emissions controlled engines, E.O. Number D-215-49!
I have 76cc chambers on the heads that are on. How much would 70cc chamber change my compression? And will work for car? The motor is a 350/ 300 horse
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.