HEI Feed Wires
JEGS 555-10552 GM HEI Power & Tach Feed Wires
JEGS 555-10552 GM HEI Power & Tach Feed Wires are made from heavy 12-gauge wire and developed as a replacement for damaged or defective factory wire leads on 1974-1990 GM applications. It will also fit many aftermarket HEI distributors with factory-style GM connections.
JEGS 555-10552 GM HEI Power & Tach Feed Wires Features:
- Simplify the addition of an hei ignition system to either an OE-Style wiring harness for a breaker point system or an aftermarket harness
- Replaces deteriorating wires in vehicles originally equipped with an HEI system
- Custom tailor installation by using both wires
- Includes 12 in. long wires and connectors
What voltage is required for a HEI distributor?
- A High Energy Ignition (HEI) distributor typically requires 12 volts to operate efficiently.
How many amps does a GM HEI ignition draw?
- The exact current draw can vary, but a GM HEI ignition system typically draws around 4 to 6 amps during normal operation.
How many amps does a 12 Volt ignition coil draw?
- A 12-volt ignition coil typically draws around 3 to 4 amps during operation.
I didn't get any instructions for this item. Where can I locate those instructions??
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.