- Can be mounted on a flat surface or steering column (clamp required for steering column mounting)
- 270-degree sweep
- Works with 2, 3, and 4 PPR (Pulses Per Revolution) signal inputs from a standard ignition coil (older 4, 6, and 8 cylinder vehicles)
- Works with 5 Volt and 12 Volt signal input from ECUs (Electronic Control Units), ignition controls, and tachometer adapters
- White LED through dial lighting and illuminated pointer for easy viewing at night
- (1) Pedestal mount base
- (1) Mounting base to tachometer body machine screw: 4mm-0.7 x 1.1875 in. long with phillips pan head
- (1) Mounting base to tachometer body Nut: 4mm-0.7
- (3) Mounting base metal screws: # 8 x 1/2 in. long with tapered phillps head
- (1) Plastic wire tubing: .250 in. I.D. x 4.250 in. long
- (1) Installation Instructions
An Inexpensive Way To Assist In Your Driving Performance
JEGS 3 ¾ inch Pedestal Mount Tachometers developed for the budget-minded consumer in mind. Tachs are essential for manual transmission vehicles and a perfect way for assisting a driver on when to shift. These units match the looks of our JEGS professional series 2 1/16 in. or 2 5/8 in. gauges and will compliment any performance vehicle''s interior. Tachs come complete with a lit pointer and are available in black or white faces and black or chrome bezel.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.