- Features 6.250 in. anti ballooning plate
- Billet cover for use with nitrous, blower and trans-brake equipped vehicles
- Rated at 800 HP
- Includes pre-installed 3/8 in.-24 bolts. Does Not include nuts.
|Performance Torque Converter|
General Application Chart *
|Rear Gear Ratio||Engine RPM Range & Compression Ratio||Converter RPM Stall Speeds **|
|Stock to 260°||Stock to 3.23||1000-4600|
8 to 9.5
|1500 to 1700|
|Stock to 265°||Stock to 3.23||1400-5000|
8 to 9.5
|1600 to 1800|
|265° to 280°||3.00 to 3.73||1600-6000|
9.5 to 10.5
|2200 to 2400|
|280° to 300°||3.55 to 4.56||2000-6500|
9.5 to 11
|3000 to 3400|
|280° to 310°||3.73 to 4.88||2800-7000|
10 to 11.5
|3500 to 3800|
10.5 to 12
* This chart is a guideline. The stall speed may vary in your application.
** Using the same torque converter, big block applications will usually experience
stall speeds approximately 200 RPM higher than what is shown.
JEGS Xtra Heavy-Duty 10 in. Converters are ideal for the street or winning on the race track. Torque Converters feature fully heat-treated 4130 chrome moly hub and turbine, three sets of Torrington bearings, TIG-welded furnace-brazed fins, and a precisely-machined pilot.
- Chrome Moly Hub & Turbine
- Three Sets of Torrington Bearings
- TIG-Welded Furnace-Brazed Fins
- Precisely-Machined Pilot
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.