Items You Need
GM TH350/TH400
JEGS 60400K1 Kit Includes:
- (1) JEGS Torque Converter 555-60400
- (3) JEGS Quick Shift Automatic Transmission Fluid (1-Gallon Container) 555-28071
Please Note:
- Converter diameter may vary based on Core Availability
- Does not fit transmissions that require lockup or clutch converters
- Small (10.75 in. Diameter bolt circle) flexplate or dual pattern flexplate required
- For Big Block applications, use JEGS XHD Converters
- Requires 3/8 in.-16 bolt
Performance Torque Converter General Application Chart * | |||
Advertised Camshaft Duration | Rear Gear Ratio | Engine RPM Range & Compression Ratio | Converter RPM Stall Speeds ** |
Stock to 260° | Stock to 3.23 | 1000-4600 8 to 9.5 | 1500 to 1700 |
Stock to 265° | Stock to 3.23 | 1400-5000 8 to 9.5 | 1600 to 1800 |
265° to 280° | 3.00 to 3.73 | 1600-6000 9.5 to 10.5 | 2200 to 2400 |
280° to 300° | 3.55 to 4.56 | 2000-6500 9.5 to 11 | 3000 to 3400 |
280° to 310° | 3.73 to 4.88 | 2800-7000 10 to 11.5 | 3500 to 3800 |
290°+ | 3.73+ | 3400-8000 10.5 to 12 | 3500+ |
* This chart is a guideline. The stall speed may vary in your application.
** Recommended for use with Small Block engines only
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.