Items You Need
Ratings |
---|
Price |
Brand |
JEGS 555-631406 Universal Master Cylinder Features:
- Constructed from aluminum for the master cylinder and composite dual reservoir with boot
- Features extra, through body holes, for side mounting
- Specifications: 1.125 in. piston for 2-piston front & 4-piston rear disc up to 4-piston front & 4-piston rear disc system
- Dimensions: mounting holes are 5/16" and are on 3-3/16" (3.188) centers, overall length: 8.25", overall width: 3.5", height from base to top of reservoir: 4.5", spacing between inlet fittings 3.0", length of plastic reservoir 6.5", and spacing from front to centerline of first inlet fitting: 1"
- Includes (2) 1/2"-20 ifm to 3/8"-24 iff fittings, (1) boot, and (1) 3/8"-24 rod
- Mounting holes are 5/16" and are on 3-3/16" (3.188) centers.
- Overall Length: 8.25"
- Overall Width: 3.5"
- Height from base to top of reservoir: 4.5"
- Spacing between inlet fittings 3.0"
- Length of plastic reservoir 6.5"
- Spacing from front to centerline of first inlet fitting: 1"
- Dimensions:
3/8"-24 Threads
Specifications:
will this work on my 86 ElCamino with vacuum Booster
will this work on a 67 cuda?
Thanks for the advice. I ordered your rear disc conversion and it arrived a few days ago. Will my old linelock system work without interfering with the master cylinder, or would you advise to get a more modern one, or not to use one at all.
Have a 1967 Mustang I'm converting to disc brakes. Maybe 4 wheel-not sure. B4 once the drums got a little glazed at126 mph thru the traps meant funny car turnaround. Will this work for 2/4wheel conversion and make a better stop w/out Gorilla leg?
Does rod pivot where it engages the master cylinder, or is it screwed in solid to the master cylinder? I need a rod that pivots for a 63 Lemans. And, can I get the rod in a longer length (say 6")? I can extend the rod, but I need the pivot.
Does master cylinder 555-631406 require a booster and what type of racing pedal will fit it?
I have a 83 Monte ss that needs just master cylinder and rod that this universal kit comes with can i use this kit for it? It's is a drag car I'm not using a brake booster just master and push rod is all I need can use this universal kit?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.