Edelbrock Big Block Ford Performer RPM Power Package
350-7166PK
Edelbrock 7166PK Details
Ford 429-460ci Big Block V8
Designed for high-performance street 429-460 Ford V8s with standard or Cobra-Jet cylinder heads. Latest technology in dual-plane design results in excellent low- and mid-range torque and outstanding horsepower on appropriately equipped engines. Will accept square-bore or spread-bore carburetors. Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets. Will not fit 1988 and later models.
Installation Notes:
Camshaft Specs:
Operating Range 1500-6500 RPM Duration Advertised 290° Intake/300° Exhaust Duration @ .050'' 234° Intake/244° Exhaust Lift @ Valve .556'' Intake/.581'' Exhaust Lift @ Cam .325'' Intake/.340'' Exhaust Lobe Separation Angle 108° Intake Centerline 103° Intake Timing @ .050" Open 14° BTDC
Close 40° ABDCExhaust Timing @ .050" Open 55° BBDC
Close 9° ATDC
){kind=link}
1500-6500 RPM Power! For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.