Operating Range	1500-6500 RPM
Duration Advertised	290° Intake/300° Exhaust
Duration @ .050''	234° Intake/244° Exhaust
Lift @ Valve	.556'' Intake/.581'' Exhaust
Lift @ Cam	.325'' Intake/.340'' Exhaust
Lobe Separation Angle	108°
Intake Centerline	103°
Intake Timing @ .050"	Open 14° BTDC Close 40° ABDC
Exhaust Timing @ .050"	Open 55° BBDC Close 9° ATDC
Vacuum @ 1000RPM Idle	12"

INSTALLATION NOTES:

Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7830.

Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5767.

Use stock ratio rocker arms only.

Adjustable pushrods or rocker arms required.

Specifications:

Intake Valve Lift (in.)

0.556

Exhaust Valve Lift (in.)

0.581

RPM Range

1000-7000

Int. Duration @ .050 in. (Deg)

234

Exh. Duration @ .050 in. (Deg)

244

Int. Duration Advertised (Deg)

290

Exh. Duration Advertised (Deg)

300

Engine Make/Size

Ford 429-460

Lifter Type

Hydraulic Flat Tappet

Usage

Street/Performance

Gaskets Included

Advertised Duration

290 int./300 exh.

Advertised Exhaust Duration

300

Advertised Intake Duration

290

Assembly Lubricant Included

Yes

Basic Operating RPM Range

1,500-6,500

Cam Style

Hydraulic flat tappet

Computer-Controlled Compatible

Duration at 050 inch Lift

234 int./244 exh.

Exhaust Duration at 050 inch Lift

244

Exhaust Valve Lift with Factory Rocker Arm Ratio (

0.581

Intake Duration at 050 inch Lift

234

Intake Valve Lift with Factory Rocker Arm Ratio (i

0.556

Lifter Style

Hydraulic flat tappet

Lifters Included

Yes

Locks Included

Pushrods Included

Quantity

Sold as a kit

Retainers Included

Rocker Arms Included

Timing Chain and Gears Included

Valve Lift with Factory Rocker Arm Ratio

0.556 int./0.581 exh.

Valve Springs Included

Valve Springs Required

Yes

Valve Stem Seals Included

Lobe Separation (Deg)

108

Manufacturer's Part Number:

7167

For high-performance street applications, Performer RPM Camshafts provide power from 1500 to 6500 RPM. These flat-tappet hydraulic lifter cams are dyno matched to Edelbrock's Performer RPM Manifolds for high-RPM horsepower while maintaining acceptable low-end torque. With 10-12 inches of manifold vacuum at idle, these cams have more lift and duration than most street cams.

*Lifters included

Please Click here to download the Instructions PDF File

Please Click here to download the Graphs PDF File

Does Edelbrock 7167 fit your vehicle?

Narrow Results

Filter By
Year

1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998

Filter By
Make

FORD LINCOLN MERCURY

Filter By
Model

Filter By
SubModel

Filter By
EngineType

V8 ( 7.0 L / 429 ) V8 ( 7.5 L / 460 )

Filter By
CC

7030 7539

Filter By
Liter

7.0 7.5

1975-1979 FORD F-150

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CUSTOM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1987-1991 FORD E-250 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CUSTOM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1977-1978 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: NORTHLAND
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 FORD FALCON

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1973-1974 FORD GALAXIE 500

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 FORD RANCHERO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: SQUIRE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1968 LINCOLN CONTINENTAL

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1984-1986 FORD E-350 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1997 FORD F-350

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1969-1972 FORD CUSTOM

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970 MERCURY COUGAR

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: COBRA JET
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1969 MERCURY CYCLONE

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: SPOILER
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1971-1972 FORD RANCHERO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: 500
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970 FORD RANCH WAGON

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: POLICE CRUISER
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1969 MERCURY CYCLONE

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: CJ
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975 FORD GRAN TORINO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: SPORT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1972-1973 FORD GRAN TORINO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: SPORT
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975-1978 MERCURY MARQUIS

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BROUGHAM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1969-1973 FORD LTD

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970-1971 FORD TORINO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: GT
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975 MERCURY MONTEGO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: VILLAGER
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 FORD CUSTOM 500

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1992-1996 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT HD
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1978-1979 FORD F-350

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: RANGER LARIAT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1972 FORD GALAXIE 500

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1995-1996 FORD F-350

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: SPECIAL
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1980 FORD E-250 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CHATEAU
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1985-1992 FORD F-350

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT LARIAT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1972 FORD RANCH WAGON

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1977-1982 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CHATEAU
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1986 FORD MOTORHOME

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CLASS C;DEERE-OSHKOSH FRD CHAS
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 MERCURY COUGAR

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XR-7
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1976 MERCURY MONTEGO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: MX VILLAGER
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 FORD F-100

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1976 FORD ELITE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1976-1978 FORD F-150

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1971-1972 FORD RANCHERO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: SQUIRE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1979 FORD F-100

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: RANGER XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973 FORD GRAN TORINO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: SQUIRE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1978 FORD E-250 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: NORTHLAND
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1991-1996 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1978 FORD E-100 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CHATEAU
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1974 FORD GRAN TORINO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: ELITE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1971 MERCURY MONTEGO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: MX BROUGHAM
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970 MERCURY MONTEGO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: VILLAGER
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1971 FORD TORINO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
EngineType: ALL
SubModel: SUPER COBRA JET

1970-1971 FORD MUSTANG

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1969 MERCURY CYCLONE

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: CJ
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975-1978 FORD LTD

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: COUNTRY SQUIRE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1978 MERCURY GRAND MARQUIS

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 FORD RANCH WAGON

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 MERCURY MONTEGO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: MX BROUGHAM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 FORD F-350

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1984-1986 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1968 LINCOLN MARK III

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1994-1996 FORD E-350 ECONOLINE CLUB WAGON

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XL HD
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 FORD RANCH WAGON

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: POLICE CRUISER
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970 FORD RANCHERO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: GT
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975-1976 FORD LTD

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BROUGHAM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1987-1991 FORD E-350 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CUSTOM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1977 FORD F-250

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1969-1970 MERCURY MARAUDER

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: X-100
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1971 MERCURY COUGAR

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
EngineType: ALL
SubModel: COBRA JET

1970 MERCURY COUGAR

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970-1971 FORD MUSTANG

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: GRANDE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970-1971 FORD TORINO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BROUGHAM
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1970-1973 MERCURY MONTEGO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: MX
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1975-1978 FORD E-250 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: NORTHLAND
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1972-1973 MERCURY MONTEGO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1993-1997 FORD F-350

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1969-1973 FORD COUNTRY SEDAN

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1973 MERCURY MONTEGO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: GT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1997 FORD F-250 HD

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1969-1973 FORD GALAXIE 500

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1987 FORD MOTORHOME

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CLASS C;DEERE-OSHKOSH FRD CHAS
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 FORD FALCON

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: FUTURA
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1971 MERCURY MONTEGO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1974 FORD GRAN TORINO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: SQUIRE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1972 FORD CUSTOM

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1978 FORD F-250

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: NORTHLAND
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1979 FORD F-150

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: RANGER
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1983-1984 FORD F-250

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: XLT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973-1974 MERCURY MONTEGO

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975 MERCURY MONTEGO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BROUGHAM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1974-1977 FORD RANCHERO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: 500
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1973 FORD RANCHERO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: SQUIRE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1972-1974 MERCURY MONTEREY

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 FORD RANCHERO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1976 MERCURY MONTEGO

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: BASE
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1975-1976 FORD THUNDERBIRD

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
EngineType: ALL
SubModel: ALL

1972-1974 MERCURY MONTEREY

CC: 7539
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CUSTOM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1978 FORD E-100 ECONOLINE

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: CUSTOM
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1995-1996 FORD F-250

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: EDDIE BAUER
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970 MERCURY COMET

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1971-1973 FORD LTD

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BROUGHAM
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1995-1996 FORD F-250

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: SPECIAL
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1970-1973 FORD TORINO

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1978-1979 FORD F-150

Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.5
SubModel: RANGER LARIAT
CUI: 460
EngineType: V8 ( 7.5 L / 460 )

1971-1973 FORD THUNDERBIRD

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1968 LINCOLN CONTINENTAL

CC: 7030
Fitment_Note: Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 506hp and 536 ft.-lbs. When Matched w/7166 Intake and 60669 Heads~Idle Vacuum at 1000 RPM - 12 inch
Liter: 7.0
SubModel: BASE
CUI: 429
EngineType: V8 ( 7.0 L / 429 )

1 2 3 >

What would be a good Distributor to go with this cam? Also any recommendations on pushrods?

Asked by: Kyle20

This is a good choice for a distributor - http://www.jegs.com/i/JEGS-Performance-Products/555/40014/10002/-1 Pushrods - http://www.jegs.com/i/JEGS-Performance-Products/555/20272/10002/-1

Answered by: Rusty B

Date published: 2018-03-23

Items You Need

Edelbrock 8569 - Intake Manifold Bolt Kit Big Block Ford

Only $33.95

Ships Today

Edelbrock 4463 - Signature Series Valve Covers Big Block Ford 429-460

Only $61.95

Ships Today

JEGS Performance Products 80521 - Stud Mounted Valve Spring Compressor Tool

Only $44.99

Ships Today

See All Items You Need

Some parts are not legal for use in California or other states with similar laws / regulations

*Not legal for sale or use on pollution-controlled motor vehicles

Top Categories

All Categories

createCookie('continuePage',window.location,1);

Edelbrock 7167

Performer RPM Camshaft Kit Big Block Ford 429/460

Part Number: 350-7167

Edelbrock 7167 Details

Specifications:

Does Edelbrock 7167 fit your vehicle?

1975-1979 FORD F-150

1987-1991 FORD E-250 ECONOLINE CLUB WAGON

1977-1978 FORD E-350 ECONOLINE CLUB WAGON

1970 FORD FALCON

1973-1974 FORD GALAXIE 500

1970 FORD RANCHERO

1968 LINCOLN CONTINENTAL

1984-1986 FORD E-350 ECONOLINE

1997 FORD F-350

1969-1972 FORD CUSTOM

1970 MERCURY COUGAR

1969 MERCURY CYCLONE

1971-1972 FORD RANCHERO

1970 FORD RANCH WAGON

1969 MERCURY CYCLONE

1975 FORD GRAN TORINO

1972-1973 FORD GRAN TORINO

1975-1978 MERCURY MARQUIS

1969-1973 FORD LTD

1970-1971 FORD TORINO

1975 MERCURY MONTEGO

1973-1974 FORD CUSTOM 500

1992-1996 FORD E-350 ECONOLINE CLUB WAGON

1978-1979 FORD F-350

1972 FORD GALAXIE 500

1995-1996 FORD F-350

1975-1980 FORD E-250 ECONOLINE

1985-1992 FORD F-350

1972 FORD RANCH WAGON

1977-1982 FORD E-350 ECONOLINE CLUB WAGON

1975-1986 FORD MOTORHOME

1973-1974 MERCURY COUGAR

1976 MERCURY MONTEGO

1973-1974 FORD F-100

1975-1976 FORD ELITE

1976-1978 FORD F-150

1971-1972 FORD RANCHERO

1979 FORD F-100

1973 FORD GRAN TORINO

1975-1978 FORD E-250 ECONOLINE CLUB WAGON

1991-1996 FORD E-350 ECONOLINE CLUB WAGON

1978 FORD E-100 ECONOLINE

1974 FORD GRAN TORINO

1971 MERCURY MONTEGO

1970 MERCURY MONTEGO

1971 FORD TORINO

1970-1971 FORD MUSTANG

1969 MERCURY CYCLONE

1975-1978 FORD LTD

1975-1978 MERCURY GRAND MARQUIS

1973-1974 FORD RANCH WAGON

1973-1974 MERCURY MONTEGO

1973-1974 FORD F-350

1984-1986 FORD E-350 ECONOLINE CLUB WAGON

1968 LINCOLN MARK III

1994-1996 FORD E-350 ECONOLINE CLUB WAGON

1970 FORD RANCH WAGON

1970 FORD RANCHERO

1975-1976 FORD LTD

1987-1991 FORD E-350 ECONOLINE

1977 FORD F-250

1969-1970 MERCURY MARAUDER

1971 MERCURY COUGAR

1970 MERCURY COUGAR

1970-1971 FORD MUSTANG

1970-1971 FORD TORINO

1970-1973 MERCURY MONTEGO

1975-1978 FORD E-250 ECONOLINE

1972-1973 MERCURY MONTEGO

1993-1997 FORD F-350

1969-1973 FORD COUNTRY SEDAN