Performer RPM 75cc Aluminum Cylinder Heads
Designed for 1968-87 429/460 Fords, these new Performer RPM heads are ideal for high-performance street, drag racing and marine applications. They are capable of 500+ hp at 6500 rpm (+30 hp more than ported factory heads) and 525+ ft/lbs. of torque at 4500 rpm with the Performer RPM Total Power Package. The Performer RPM heads with 75cc combustion chambers are ideal for use on 1968-71 engines originally equipped with 72-76cc heads. This head matches with Edelbrock Performer #350-2166 or Performer RPM #350-7166 for a proven combination. They accept all factory accessories as well as factory exhaust, aftermarket headers and factory valvetrain components. Requires the use of 3/8'' diameter pushrods.Tech Tip: To gain more spark plug clearance, Edelbrock recommends using Champion RC Series plugs such as the RC12YC (P/N 192-49776). They are 0.230'' shorter than a conventional spark plug and have a 5/8'' hex for easier access.
|Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28'' H2O|
Would these fit a stock 460 in a 73 Lincoln Continental Mk IV?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.