Blaster SS Coil
MSD Blaster Coils are designed to improve spark output and are made for use with stock coil, Blaster Ignition, MSD 5, 6 or 7 Ignition Control performance upgrades. Special 100:1 windings are used to provide maximum build-up of voltage and are kept cool and securely held in an oil-filled metal canister. The tower assembly is molded of durable alkyd material and wide spaced brass primary terminals prevent the possibility of spark. There are several Blaster Coil styles available, all with the same internal specifications, but with different housings or components.Note: Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is needed in your application.
JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.
I have the MSD street fire ignition and currently using a blaster 2 coil with the adapter for the female plug wire that goes to the MDS distributor can I use this to replace my current coil setup.
Will the FItech EFI units drive this coil with the built in circuit, or will it still require a CDI box?
Will this coil work with a 7AL box?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.