CD Electronic Ignition Coils
JEGS 555-40155 High-Output Ignition Coil
Don’t let a weak spark hinder your vehicle’s performance—crank it up with a high output JEGS Ignition Coil. This coil is designed to work specifically with the high output inductive storage ignition module in RTR distributors. The heavy gauge windings are engineered to ensure ultimate power at higher RPM levels. A housing molded of glass reinforced polyester and high-temperature epoxy encapsulation resists shock and vibration while providing exceptional thermal conductivity. Brass primary contacts guarantee maximum conductivity, while the male tower offers surpassing boot/terminal retention and protection from arch over. This coil will also work with 6 Series CD ignition systems.
JEGS 555-40155 High-Output Ignition Coil Features:
- Primary Resistance: 0.4 OHMs
- Secondary Resistance: 5.0K OHMs
- Primary Inductance: 6.5 mH
- Turns Ratio: 65:1
- Maximum Voltage: 40,000 Volts
- Peak current: 300 mA
- Spark duration: 220 uS
JEGS 555-40155 Mounting Hardware Included:
- (3) M4-0.7 x 35 mm Bolts
- (3) M4-0.7 Nylon Lock Nuts
- (3) Washers
- (2) #10-32 x 3/8 in. Screws
- (3) Rubber Mounts
- (2) Ring Connectors
can this coil be used on a 1996 chevy caprice with the Optispark distributor ??
Can this coil be used with ignitions that don’t have an ignition box?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.