0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
Track Order
Help
Contact Us
Brodix 1110001

Brodix -11X Series Cylinder Heads Spread Exhaust Port

158-1110001

Free Shipping Estimated to ship directly from the manufacturer on 10/30/18

$1,545.18
Brodix -11X Series Cylinder Heads Spread Exhaust Port $1,545.18
QTY
-11X Series Cylinder Heads
  • Spread Exhaust Port
  • 225cc Intake Ports
  • 67cc Combustion Chambers
  • 2.080'' Intake / 1.600'' Exhaust Valve Sizes
  • Angle Plug
  • Bare, 2/pkg.
  • Brodix 1110001 Details

    -11X Series Cylinder Heads

  • 67cc Combustion Chambers
  • Spread Exhaust Ports
  • This head is sold as an unassembled bare casting. It is finished machined and includes valve guides and valve seats installed. This head does NOT include studs, valves, springs retainers or locks.

    Cylinder Head Specifications
  • Intake Port Volume: 225cc
  • Combustion Chamber Volume: 67cc
  • Valve Sizes: 2.080'' Intake / 1.600'' Exhaust ( 11/32'' Stem Diameter )
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Fel-Pro p/n 375-1206, Cometic p/n 245-C5414
  • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
  • Exhaust Gasket: Brodix p/n 158-MG1500 (Spread Port)
  • Head Bolts: ARP p/n 070-134-3601 or Manley p/n 660-42313
  • Head Bolt Washers: MANLEY p/n 660-42102
  • Head Studs: ARP p/n 070-234-4301 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 23°
  • Angle Milling: .0078'' per cc
  • Flat Milling: .0060'' per cc
  • Pushrod Slots: 40/60
  • Stud Girdle: 40/60 Brodix p/n 158-BR6440
  • Rocker Arms: Standard, T&D Economy 40/60 2256, Jesel 40/60 Shaft System KPS 01302
  • Lifters: Standard
  • Exhaust Pattern: Standard or Spread Port
  • Valve Centerline: 40/60
  • Spring Pockets: May not be cut any larger or deeper than 1.550''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix BM 1000(p/n 158-BM1000) / HV 1000 (p/n 158-HV1000) / HV 1002 (p/n 158-HV1002) / SE 100 (p/n 158-SE100) / SE 102 (p/n 158-SE102)

  • Specifications:

    Accessory Bolt Holes Drilled
    Yes
    CNC-Machined Combustion Chamber
    No
    CNC-Machined Exhaust Runner
    No
    CNC-Machined Intake Runner
    No
    Combustion Chamber Volume (cc)
    67
    Cylinder Head Finish
    Natural
    Cylinder Head Material
    Aluminum
    Cylinder Head Style
    Bare
    Damper Spring Included
    No
    Exhaust Port Location
    Spread
    Exhaust Port Shape
    D-Port
    Exhaust Valve Diameter (in.)
    1.6
    Exhaust Valves Included
    No
    Guideplates Included
    No
    Heat Crossover
    No
    Intake Port Location
    Standard
    Intake Runner Volume (cc)
    225
    Intake Valve Diameter (in.)
    2.08
    Intake Valves Included
    No
    Locks Included
    No
    Machined for O-Ring
    No
    Oiling Style
    Through pushrod
    Quantity
    Sold as a pair
    Retainers Included
    No
    Rocker Arm Nuts Included
    No
    Rocker Arm Studs Included
    No
    Rocker Arms Included
    No
    Spark Plug Style
    Angled
    Steam Holes Drilled
    No
    Valve Guide Material
    Phosphorous bronze
    Valve Guides Included
    Yes
    Valve Seat Machine Style
    3-angle
    Valve Seat Material
    Ductile iron
    Valve Seats Machined
    Yes
    Valve Springs Included
    No
    Valve Stem Seals Included
    No
    Manufacturer's Part Number:
    1110001

    Available Standard or Spread Exhaust Ports
    23° Intake & Exhaust Valve Angles

    The Brodix Small Block Chevy -11X Series Aluminum Cylinder Heads are available with a standard or spread exhaust port pattern. This 23° head flows 285 cfm @ .700'' lift straight out-of-the-box with as-cast runners and chambers. The BP -11X Series heads feature CNC ported combustion chambers that flow up to 316 cfm @ .700'' lift. Brodix recommends this head be installed on a 400ci+ engine. The -11X requires a special stud girdle and longer pushrods. Piston valve notches must be checked for clearance. A valve length of .150'' longer than stock is required. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. The industry standard has been taken to the next level with modernized CNC porting. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold in Pairs. !

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  • Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.