0
0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
Edelbrock 5022

Edelbrock Torker-Plus Camshaft & Lifter Kit for Small Block Ford 289-302ci

350-5022

made in usa
Free Shipping Ships directly from the manufacturer

$274.95
Edelbrock Torker-Plus Camshaft & Lifter Kit for Small Block Ford 289-302ci $274.95
Out of stock
QTY
Torker-Plus Camshaft & Lifter Kit
  • Small Block Ford 289-302ci
  • Lift: .472''/.496"
  • Duration @ .050: 214°/224°
  • Advertised Duration: 280°/290°
  • 2500-6500 RPM Range
  • Edelbrock 5022 Details

    Small Block Ford 289-302 (exc.Boss)

    Operating Range2500-6500 RPM
    Duration Advertised280° Intake/290° Exhaust
    Duration @ .050''214° Intake/224° Exhaust
    Lift @ Valve.472'' Intake/.496'' Exhaust
    Lift @ Cam.295'' Intake/.310'' Exhaust
    Lobe Separation Angle112°
    Intake Centerline107°
    Intake Timing @ .050" Open 0° BTDC
    Close 34° ABDC
    Exhaust Timing @ .050" Open 49° BBDC
    Close 5° ATDC

    INSTALLATION NOTES:
  • Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7820 (1965½72-1/2) or 350-7811 (1973½90). Accu-Drive gear drive 350-7892 may also be used.
  • Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5722.
  • Use stock ratio rocker arms only.
  • Not for 1985-later engines with roller lifters.

  • Specifications:

    Intake Valve Lift (in.)
    0.472
    Exhaust Valve Lift (in.)
    0.496
    Int. Duration @ .050 in. (Deg)
    214
    Exh. Duration @ .050 in. (Deg)
    224
    Int. Duration Advertised (Deg)
    280
    Exh. Duration Advertised (Deg)
    290
    Lifter Type
    Hydraulic Flat Tappet
    Usage
    Street/Performance
    Engine Make/Size
    Ford 260-302
    RPM Range
    2000-9000
    Gaskets Included
    No
    Lobe Separation (Deg)
    112
    Advertised Duration
    280 int./290 exh.
    Advertised Exhaust Duration
    290
    Advertised Intake Duration
    280
    Assembly Lubricant Included
    Yes
    Basic Operating RPM Range
    2,500-6,500
    Cam Style
    Hydraulic flat tappet
    Computer-Controlled Compatible
    No
    Duration at 050 inch Lift
    214 int./224 exh.
    Exhaust Duration at 050 inch Lift
    224
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.496
    Intake Duration at 050 inch Lift
    214
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.472
    Lifter Style
    Hydraulic flat tappet
    Lifters Included
    Yes
    Locks Included
    No
    Pushrods Included
    No
    Quantity
    Sold as a kit
    Retainers Included
    No
    Rocker Arms Included
    No
    Timing Chain and Gears Included
    No
    Valve Lift with Factory Rocker Arm Ratio
    0.472 int./0.496 exh.
    Valve Springs Included
    No
    Valve Springs Required
    Yes
    Valve Stem Seals Included
    No
    Manufacturer's Part Number:
    5022

    2500-6500 RPM Power!

    The Edelbrock Torker-II manifold is a single-plane, low-rise design that works well for high-rpm, high-performance street applications. The low profile of a Torker-II intake is ideal for applications where hood clearance is limited. A Torker-II produces gains in top-end horsepower with adequate throttle response. These manifolds are not mileage or emissions related manifolds, they are only for high-performance applications.

    Does Edelbrock 5022 fit your vehicle?

    Narrow Results
    Filter By Year
    Filter By Make
    Filter By Model
    Filter By SubModel
    Filter By EngineType
    Filter By CC
    Filter By Liter
    Filter By Aspiration

    1985-1996 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: EDDIE BAUER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1980 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: RANGER XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1967 FORD RANCHERO

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: 500 XL
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1979-1980 FORD E-250 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1964 FORD SPRINT

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1996-2000 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: LIMITED
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1986 FORD LTD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: COUNTRY SQUIRE LX
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963-1967 FORD FAIRLANE

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1968 FORD FALCON

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1970 MERCURY CYCLONE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: GT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1983 FORD E-250 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: HERITAGE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1997-2001 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • Aspiration: N
    • SubModel: XLT
    • Engine Vin: P
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1995-1996 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: SPECIAL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1987-1991 MERCURY GRAND MARQUIS

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: GS

    1977-1979 FORD LTD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: LANDAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 FORD MUSTANG

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1975 FORD E-250 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1966 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: SHELBY GT-350H

    1982-1996 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963-1964 FORD GALAXIE 500

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: VICTORIA
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1964 FORD FALCON SEDAN DELIVERY

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1967-1968 MERCURY COUGAR

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: XR-7
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1984-1985 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: GT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1980 FORD E-350 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1980-1993 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1972-1974 TVR 3000M

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 MERCURY COMET

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1983 LINCOLN CONTINENTAL

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: ALL

    1969-1974 FORD E-200 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 FORD F-100

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1964 FORD FALCON SEDAN DELIVERY

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1966-1967 FORD FAIRLANE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: 500XL
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1977 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BROUGHAM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1978 FORD MUSTANG II

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: GHIA
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: F
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969-1974 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1982-1983 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XLS
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1965-1968 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: SHELBY GT-350

    1968-1972 FORD RANCH WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969-1974 FORD E-200 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CLUB WAGON
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1982 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CHATEAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1982 FORD F-100

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1980 LINCOLN MARK VI

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1973 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: WAGON
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1979 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984 LINCOLN MARK VII

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: LSC
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1966-1967 FORD GT40

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: MK III
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1983-1988 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: SPORT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975 FORD E-350 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CHATEAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1974 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1993-1994 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 MERCURY COMET

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1968-1972 FORD CUSTOM

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1981 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XR-7
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1970 FORD RANCH WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: POLICE CRUISER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1996 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1988-1991 FORD E-150 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1981 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: TOWN LANDAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1976-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: G
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975 FORD E-350 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: RANGER LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1966 TVR GRIFFITH

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1992-1996 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1964-1967 MERCURY COMET

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1987-1992 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: RANGER LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1987-1991 MERCURY COLONY PARK

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: GS

    1979 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: F
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1982 LINCOLN CONTINENTAL

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: GIVENCHY
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963 FORD 300

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1983 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • EngineType: ALL
    • SubModel: GT

    1968-1972 FORD COUNTRY SQUIRE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 FORD FALCON

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: FUTURA
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1979-1982 FORD E-150 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1970-1972 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1981 MERCURY GRAND MARQUIS

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: COLONY PARK
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1982 MERCURY MARQUIS

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1979 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1973-1974 FORD LTD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1999-2000 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XLS
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963 MERCURY METEOR

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1986 MERCURY GRAND MARQUIS

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: COLONY PARK
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963-1967 FORD GALAXIE 500

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: XL
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1968-1974 FORD TORINO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963-1967 FORD COUNTRY SEDAN

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1964-1965 FORD GT40

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1979-1982 FORD E-350 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1965-1967 FORD CUSTOM

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1964-1967 FORD FALCON

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1977-1978 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: RANGER XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969 FORD COUNTRY SEDAN

    • CC: 4949
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 MERCURY CYCLONE

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1968-1969 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XR-7
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1985-1992 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: XLT LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1970-1973 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: GRANDE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1982 FORD E-350 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Incl. Hyd. Flat Tappet Lifters~Lobe Seps 112 Deg.; Intake Center Line 107 Deg.
    • Liter: 5.0
    • SubModel: CHATEAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.