Items You Need
Ratings |
---|
Price |
Brand |
GM TH350/400 or Powerglide
JEGS 555-60429 XHD Torque Converter Features:
- Performance for street and track use for improved launch and acceleration
- Assembled with high-quality materials
- 2900-3200 rpm stall speed to match your engine and camshaft needs
- Dual 6.25 in. anti-ballooning plates for applications up to 800 horsepower including vehicles with nitrous or super/turbochargers
- Dual 6.250 in. anti-ballooning plates for use with nitrous, blower, and transbrake applications
- Rated at 800 horsepower
- Dual bolt pattern style for SBP(10.750 in.) or LBP(11.500 in.) flexplates
- Uses 7/16 in. bolts
Performance Torque Converter General Application Chart * | |||
Advertised Camshaft Duration | Rear Gear Ratio | Engine RPM Range & Compression Ratio | Converter RPM Stall Speeds ** |
Stock to 260° | Stock to 3.23 | 1000-4600 8 to 9.5 | 1500 to 1700 |
Stock to 265° | Stock to 3.23 | 1400-5000 8 to 9.5 | 1600 to 1800 |
265° to 280° | 3.00 to 3.73 | 1600-6000 9.5 to 10.5 | 2200 to 2400 |
280° to 300° | 3.55 to 4.56 | 2000-6500 9.5 to 11 | 3000 to 3400 |
280° to 310° | 3.73 to 4.88 | 2800-7000 10 to 11.5 | 3500 to 3800 |
290°+ | 3.73+ | 3400-8000 10.5 to 12 | 3500+ |
* This chart is a guideline. The stall speed may vary in your application.
** Using the same torque converter, big block applications will usually experience
stall speeds approximately 200 RPM higher than what is shown.
FAQ
What is the best stall speed for a torque converter?
- The best stall speed for a torque converter depends on your vehicle's engine specifications and intended use. Consult with our online or phone technician experts for personalized recommendations.
What does a 3200 stall converter do?
- A 3200 stall converter, such as our XHD converter for TH400, enhances launch performance by allowing the engine to reach higher RPM before engaging the transmission, ideal for racing applications.
Specifications:
Will this work with a (BOP) TCI transmission th350
Does this converter have a bushing supported turbine?
Will this for my 2015 Silverado 5.3 LT
Will this converter work with a 4L80e/4.8l combo? If not which one would you recommend?
Will this fit a 2006 AT mustang GT with the 4.6? Also have 3.73 gears and is currently procharged?
Will this bolt to a gen 3 6.0 with a flat flex plate?
Is the XHD series safe to use with a transbrake application?
What’s the spline count and is this converter for a turbo engine
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.