Street Eliminator Heads
|Small Block Chevy 195cc Eliminator Basic Package Components|
|100% CNC Ported Combustion Chambers|
|100% CNC Ported Exhaust Ports|
|100% CNC Ported Intake Ports|
|Competition 5-Angle Valve Job|
|Intake Valve, 2.050'' x 4.903'' o.a.l.|
|Exhaust Valve, 1.600'' x 4.955'' o.a.l.|
|1.290'' OD Hydraulic Roller Dual Valve Spring, 135 lbs. on seat, .600'' maximum lift, max RPM 6300-6500|
|7º Manley 4140 Chrome Moly Retainers|
|7º Valve Locks|
|3/8'' Rocker Studs|
|Adjustable 5/16'' Guide Plates|
|Viton Valve Seals|
|Hardened Spring Cups|
|Intake Valve Seats|
|Exhaust Valve Seats|
|Bronze Valve Guides|
|Small Block Chevy 195cc Eliminator Street Head Specifications|
|Head Torque w/Moly Lube||65-70 Ft. Lbs.|
|Rocker Stud Torque||55 Ft. Lbs.|
|Intake Port Gasket, 1.280'' x 2.090'' w/ 3/8'' radius||Fel-Pro 375-1205 - DO NOT PORT MATCH Intake Manifold to Fel-Pro Gasket.|
|Exhaust Port Gasket||Fel Pro 375-1404|
|Head Gasket||350ci Fel Pro 375-1003
400ci Fel Pro 375-1014
|Head Bolts & Studs||Standard ARP|
|Head Bolt Washers||Manley Standard|
|Suggested Manifold||AFR p/n 033-4802 or Edelbrock Vic Jr p/n 350-2975 or Super Victor p/n 350-2925|
|Spark Plug Starting Range||AC FR3LS or 41629|
|Spring Pocket can be cut to 1.625, no deeper.|
|Valve Spacing||Standard GM L98|
|Angle Mill||.008'' per cc|
|Flat Mill||.006'' per cc|
|NOTE:||Flat and Angle mills might require a .120'' thick head gasket.|
The Ultimate Bolt-on Emissions Legal Street Weapon!
The AFR Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 195cc intake port small block Chevy cylinder heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 65cc or 75cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8 mm diameter stem, 2.050 in. (comp package has 2.080 in.) intake valve and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500 rpm, 23° valve angle, and standard valve spacing make this the perfect street head for 350-400 ci engines from 1955-1986.
Also available for 1987 to 1995 cast iron head engines with center bolt valve covers and two center intake bolts at 72° angle, AFR head p/n 033-1041 (dual valve cover bolt pattern is standard — no extra parts required). Exhaust port and bolt pattern are raised 3/32 in. over GM L98 cylinder heads, so this rarely affects header or chassis fitment.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.