- Fits all Small Block Chevy (except LS series engines (LS1, LS6, 4.8L, 5.3L, and 6.0L))
Note: May require the use of "R" Terminal Diode Kit, 555-10038, which allows the use of aftermarket mini starters in GM vehicles originally equipped with breaker point ignitions
Prostarter Starters use ball bearings instead of bushings that can wear prematurely. While other vehicle starters offer 3:1 gear reduction, JEGS Prostarters have a Nippondenso motor with a 4.4:1 ratio and cranking power for engines with as much as 12.5:1 compression.
- Amp Draw: 80 to 90
- Solenoid housings sealed with O-rings for added protection
- Full ball bearing construction (instead of bushings) for lasting performance
- Billet aluminum adapters with 4 adjustable mounting positions for more oil pan or header clearance (except 555-10081 and 555-10085)
Click here to learn more.
Is there any warranty with this item
what is the HP rating of this starter?
What is the torque spec in ft lbs. for this starter?
What is the RPM in a non loaded rotation. Because of the gear reduction , is the loaded RPM considerably slower compared to a oem.
Would it be possible to manufacture a starter for the Chevrolet with both the straight and angled bolt patterns ? Being universal for the Chevy application ?
can this starter be wired to use a remote mounted for starter solenoid...? jumper lead from solenoid to battery cable connection, then a 4 gauge cable from a remote solenoid to the + terminal on the starter. and the starter wire to the solenoid...?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.